<aside> <img src="/icons/info-alternate_blue.svg" alt="/icons/info-alternate_blue.svg" width="40px" />

There is a link to a video at the bottom of the page going through the process of charging an Arrowhead.

</aside>

Aircraft Battery Information

When to land

• Prepare to return for landing around 25% on the GCS display
• Land before the battery reaches 10% on the GCS display

Charger Information:

Charger Operation:

Begin by connecting the charger to an appropriate power source. Now we will make sure the charger has the wires connected appropriately to itself. The yellow power XT30 cable will only fit in the charger one way. However, the white flat balancing cable can connect to the charger in multiple ways. For the balancing cable make sure it is connected all the way to the left of the port.

Next connect the wide flat balancing plug to the aircraft battery. It is best practice to always connect the balancing plug first to the battery. Then connect the yellow power XT30 connector to the battery.

The images below will instruct you on how to properly begin charging the battery: