Each Arrowhead system is made up of a ground control station (GCS) and at least one Arrowhead aircraft. All components of an Arrowhead system are purpose built to operate in complex, low light, GPS denied environments, without direct operator line of sight to the aircraft.

Standard Package Inventory

The standard kit for Arrowhead consists of:

1x Hard Case

1x Arrowhead 2024 Aircraft

3x Aircraft Battery

1x Handheld GCS

1x Battery Charger & Cables

1x Controller Charger

1x Propeller Nut Tool

1x Motor Screwdriver

3x Spare props

1x Spares bag containing screws and an extra top cap

Asus ROG Ally

UXV Navigator Tab 3

Important Notes About The Aircraft

The Arrowhead aircraft is a small semi-autonomous quadcopter constructed from plate carbon fiber, in addition to Fused Deposition Modeling (FMD) and Stereolithography (SLA) printed plastics. Arrowhead is equipped with a HD camera that streams 720p real time video back to the GCS. This camera is infrared sensitive in addition to visual light.

Arrowhead has 3 modes for flight:

1. The primary flight mode is “Position”. This mode will keep the aircraft will maintain its relative position while hovering, and maintain altitude while the throttle is centered.
2. “Altitude” mode is similar to position mode but will only hold the aircraft's vertical position, horizontal movement is managed fully by the operator in this mode.
3. “Stabilize'' mode will only self level the aircraft and allow for the greatest amount of direct manual control.

<aside> <img src="/icons/light-bulb_yellow.svg" alt="/icons/light-bulb_yellow.svg" width="40px" /> More information on aircraft modes can be found here:

Arrowhead Flight Modes

</aside>

All Uniform Sierra’s aircraft will not limit flight performance due to location or altitude. This ensures the system can be used wherever it is needed. While Arrowhead has propeller guards, the propellers can still create a hazard and the aircraft must be operated safely.

<aside> <img src="/icons/light-bulb_yellow.svg" alt="/icons/light-bulb_yellow.svg" width="40px" /> More information on device safety can be found:

Regulations and Safety

</aside>

<aside> <img src="/icons/exclamation-mark_red.svg" alt="/icons/exclamation-mark_red.svg" width="40px" /> The responsibility falls on the operator to stay legally compliant with local, state, and federal regulations around aircrafts and other sUAS as well as to safely operate the aircraft.

</aside>

Arrowhead is designed and sold as an interior only UAS, this means the system is not remote ID compliant for exterior operations, if needed a broadcast module can be fitted to the system to allow for outdoor operations with line of sight. Attaching double stick tape to the top cap to provides a mounting surface for the remote ID device.